5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
144 Experion PKS Series A Fieldbus Interface Module User's Guide R400
Honeywell July 2010
Step Action
type.
or
Click OverWrite to overwrite the device type to continue.
4
Click OK to acknowledge the version of DD files.
A dialog box appears displaying information about the DD files, which have
Conditionals.
5
Click OK to import the DD files. Monitor progress through the Opening
Device Vendor Files, Creating Definition Files, and Importing the Block
Type to ERDB progress dialog boxes that open in succession.
A dialog box appears displaying information about upgrading Knowledge
Builder to the latest version.
ATTENTION
If the DD files do not contain Conditionals then the process of
importing DD files continues without displaying a message about the
presence of Conditionals.
6
Click OK to acknowledge upgrading the Knowledge Builder to the latest
version.
A dialog box appears displaying that the Device type is successfully created.
7
Click OK.
In the Library tab, a new device block type is created under the Vendor’s
name and the DD files with constructs are supported.
ATTENTION
You need Knowledge Builder version 4.2 or greater installed for device
help information to be added to the Dynamic Help book in Knowledge
Builder.
To Next Page
Loading...
