5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 153
July 2010 Honeywell
Step Action Result
2
Click Devices tab.
Shows all devices currently in Project
tab. This illustration is for example
purposes only.
3
Click the device you want to assign
to a Link to highlight it.
Confirm that the desired Link is
selected in the Select Link list box.
Click the Assign button to assign
the selected device to the selected
Link. This illustration is for example
purposes only.
Device is added to the Assigned Devices
list box with the assign state icon. This
illustration is for example purposes only.
To Next Page
Loading...
