Honeywell Series A - Page 187

5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 187
July 2010 Honeywell
Step Action Result
6
Sequentially press <Tab> until the PV
High field is highlighted. Key in >70<.
Press <Tab>.
Moves cursor to Priority field and
highlights it.
7
Click
button to open dropdown menu
and select HIGH. Press <Tab>.
Moves cursor to Severity field and
highlights it.
8
Key in >8<. Press <Tab>.
Moves cursor to PV Low field and
highlights it.
9
Key in >25<. Press <Tab>.
Moves cursor to Priority field and
highlights it.
10
Click
button to open dropdown menu
and select HIGH. Press <Tab>.
Moves cursor to Severity field and
highlights it.
11
Key in >8<. Press <Tab>.
Moves cursor to PV Low Low field and
highlights it.