Honeywell Series A - Page 193

5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 193
July 2010 Honeywell
Step Action Result
6
Click
button to open dropdown menu
and select NORMAL. Click the Algorithm
tab.
Opens the Algorithm tab form with
Control Equation Type highlighted.
(Please see previous Attention note
about skipped parameters.)
7
Accept the default value EQA. Press
<Tab>.
Moves cursor to Selected Control Action
option.
8
Click DIRECT to select it. Click the Set
Point tab.
Opens the Set Point tab form with SP
field highlighted.