8. Maintenance, Checkout, and Calibration
8.1. Adding, Removing and Replacing Components
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 313
July 2010 Honeywell
Step Action Result
36
Click the Match From Project Device to
Uncommissioned Device button.
Opens Warning prompt about
Tag/Address changes in UCD.
37
Click the Continue button.
Progress dialog appears to track status
of function.
38
Wait for match to be completed and note
that the UCD's Tag and Address now
match the Project Device. Click the OK
button.
Closes the Match dialog.
39
In Project tab, click LINK with new project
device (ST101) and click Controller-
>Load with Contents.
Calls up the Load Dialog.
To Next Page
Loading...
