8. Maintenance, Checkout, and Calibration
8.3. Replacing Device Template with a Different One
324 Experion PKS Series A Fieldbus Interface Module User's Guide R400
Honeywell July 2010
Step Action
7
Click the Validate button to initiate the validation function.
8
Wait for the validation process to be completed one device at a time. Note
any errors or warnings that may be displayed. Only devices with no errors will
be enabled for replacement.
(Click the Cancel button to exit the operation and start over after making any
necessary corrections.)
9
Check the check box in the Select column to select the device for
replacement. All devices that passed validation are automatically selected,
and those that failed cannot be selected.
To Next Page
Loading...
