3. Fieldbus Integration With Experion System
3.8. Block Instantiation Support
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 91
July 2010 Honeywell
If you want
to . . .
Then, Notes and References
Optionally,
check
instantiated
block
resource
usage.
i) Right-click device block and
select Configure Module
Parameters from shortcut menu.
j) Click Block Instantiation tab.
k) Check Resource # column for the
amount of resource used by a
particular block. The # (1, 2, …)
columns can vary depending on
vendor and function block type.
l) In Resource Statistics grid, check
Limit and Used columns to view
resource allocations against
assigned limits.
Some vendors provide
resource information as an
option. You can use this
information to determine if
the configured block
contents will fit within the
available resources of the
device.
A resource represents a
finite entity used by a device
such as Central Processing
Unit (CPU) or Memory.
To Next Page
Loading...
