EasyManuals Logo

HP xw4600 User Manual

HP xw4600
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
Heading Option Description
Serial port
Parallel port
Front USB port
Rear USB port
Internal USB port
System audio
Network controller
Legacy diskette
Embedded Security Device
SATA0–5
For each device, Device Available is the default setting and allows the operating system to access
the device. Device Hidden makes the device unavailable; it is disabled by the BIOS and cannot be
enabled by the operating system. When enabled, Embedded Security Device offers these options:
Embedded Security Device Support
Enable/Disable—Turns the Trusted Platform Mechanism (TPM) on and off. If this option is
enabled, the following options become available:
Power-On Authentication Support—Enables and disables an authentication feature that
requires you to enter a TPM user key password to boot the system. This feature uses
the TPM to generate and store the authentication password.
Reset Authentication Credential—Resets the authentication functionality and clears all
authentication credentials.
NOTE: A setup password must be set to enable the Embedded Security Device and to access
any security features associated with the Embedded Security Device.
Network Service
Boot
Enables or disables the ability to boot to the network using the F12 key or the boot order.
System IDs Asset Tag—A 16–byte string identifying the system.
Ownership Tag—An 80–byte string identifying ownership of the system. This tag is displayed on
the screen during POST.
Universal Unique Identifier (UUID)—Can only be updated if the current chassis serial number is
invalid. (These ID numbers are normally set in the factory and are used to uniquely identify the
system.)
Keyboard—Enables you to set the keyboard locale for System ID entry.
DriveLock
Security
Allows you to select a hard drive, enable or disable DriveLock security on that drive, and set a
DriveLock password. This option appears only if your drive supports DriveLock.
CAUTION: Enabling DriveLock can render a hard drive permanently inaccessible if the master
password is lost or forgotten. No method exists to recover the password or access the data.
System Security Data Execution Prevention—Enables or disables Data Execution Prevention mode in the
processors. This mode prohibits code from running in pages that were set up as data pages, and
prevents attacks such as buffer overflows. Operating system support is required for this feature.
Virtualization Technology (VTx)—Enables Intel Virtualization Technology to increase workstation
performance.
Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
32 Chapter 3 System management ENWW

Table of Contents

Other manuals for HP xw4600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP xw4600 and is the answer not in the manual?

HP xw4600 Specifications

General IconGeneral
Tcase72.4 °C
Bus typeFSB
SteppingE0
Processor cache6 MB
Processor cores2
Processor modelE8400
System bus rate- GT/s
Processor familyIntel® Core™2 Duo
Processor seriesIntel Core 2 Duo E8000 Series
Processor socketLGA 775 (Socket T)
Processor codenameWolfdale
Processing Die size107 mm²
Processor frequency3 GHz
Processor cache typeL2
Processor lithography45 nm
Processor manufacturerIntel
Processor front side bus1333 MHz
Processor operating modes64-bit
ECC supported by processorNo
Thermal Design Power (TDP)65 W
Number of processors installed1
CPU multiplier (bus/core ratio)9
Number of Processing Die Transistors410 M
Audio systemHigh Definition Audio
Product typeWorkstation
Motherboard chipsetIntel® X38 Express
ECCYes
Internal memory2 GB
Memory clock speed800 MHz
Internal memory typeDDR2-SDRAM
Maximum internal memory8 GB
Memory layout (slots x size)2 x 1 GB
HDD speed7200 RPM
HDD capacity250 GB
HDD interfaceSATA
Optical drive typeDVD-RW
Graphics card-
Networking featuresGigabit Ethernet (10/100/1000)
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power supply475 W
Chassis typeTower
Country of originChina
Processor codeSLB9J
Processor ARK ID33910
Processor package size37.5 x 37.5 mm
On-board graphics card modelNot available
Weight and Dimensions IconWeight and Dimensions
Depth456 mm
Width168 mm
Height450 mm
Weight19000 g

Related product manuals