HPE FlexNetwork 5510 HI Series

269
<Description hp:regExp="[A-Z]*"/>
</Interface>
</Interfaces>
</Ifmgr>
</top>
</filter>
</get-config>
</rpc>
• Conditional match
To implement a complex data filtering with digits and character strings, you can add a match
attribute for a specific element. Table 38 lists the conditional match operators.
Table 38 Conditional match operators
Operation
Operator
Remarks
More than match="more:value"
More than the specified value
. The supported data types
include date, digit, and character string.
Less than match="less:value"
Less than the specified value. The supported data types
include date, digit, and character string.
Not less than match="notLess:value"
Not less than the specified value. The supported data types
include date, digit, and character string.
Not more than match="notMore:value"
Not more than the specified value. The supported data types
include date, digit, and character string.
Equal match="equal:value"
Equal to the specified value. The supported data types include
date, digit, character string, OID, and BOOL.
Not equal match="notEqual:value"
Not equal to the specified value. The supported data types
include date, digit, character string, OID, and BOOL.
Include match="include:string"
Includes the specified string. The supported data types include
only character string.
Not include match="exclude:string"
Excludes the specified string. The supported data types include
only character string.
Start with match="startWith:string"
Starts with the specified string. The supported data types
include character string and OID.
End with match="endWith:string"
Ends with the specified string.
The supported data types
include only character string.
# Copy the following text to the client to retrieve extension information about the entity of which
the CPU usage is more than 50%:
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:hp="http://www.hp.com/netconf/base:1.0">
<get>
<filter type="subtree">
<top xmlns="http://www.hp.com/netconf/data:1.0">
<Device>
<ExtPhysicalEntities>
<Entity>
<CpuUsage hp:match="more:50"></CpuUsage>
</Entity>
</ExtPhysicalEntities>
</Device>