HPE FlexNetwork 5510 HI Series

99
Configuring the non-IETF OSPF GR restarter
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enable OSPF and enter its
view.
ospf
[ process-id |
router-id
router-id |
vpn-instance
vpn-instance-name ] *
N/A
3. Enable the link-local
signaling capability.
enable link-local-signaling
By default, the link-local signaling
capability is disabled.
4. Enable the out-of-band
re-synchronization
capability.
enable
out-of-band-resynchronization
By default, the out-of-band
re-synchronization capability is
disabled.
5. Enable non-IETF GR.
graceful-restart
[
nonstandard
]
[
global
|
planned-only
]
*
By default, non-IETF GR
capability is disabled.
6. (Optional.) Set the GR
interval.
graceful-restart interval
interval
By default, the GR interval is 120
seconds.
Configuring OSPF GR helper
You can configure the IETF or non-IETF OSPF GR helper.
Configuring the IETF OSPF GR helper
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enable OSPF and enter its
view.
ospf
[ process-id |
router-id
router-id |
vpn-instance
vpn-instance-name ] *
N/A
3. Enable opaque LSA
reception and advertisement
capability.
opaque
-
capability enable
By default, opaque LSA reception
and advertisement capability is
enabled.
4. (Optional.) Enable GR helper
capability.
graceful-restart helper enable
[
planned-only
]
By default, GR helper capability is
enabled.
5. (Optional.) Enable strict LSA
checking for the GR helper.
graceful-restart helper
strict-lsa-checking
By default, strict LSA checking for
the GR helper is disabled.
Configuring the non-IETF OSPF GR helper
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enable OSPF and enter its
view.
ospf
[ process-id |
router-id
router-id |
vpn-instance
vpn-instance-name ] *
N/A
3. Enable the link-local
signaling capability.
enable link-local-signaling
By default, the link-local signaling
capability is disabled.
4. Enable the out-of-band
re-synchronization capability.
enable
out-of-band-resynchronization
By default, the out-of-band
re-synchronization capability is
disabled.
5. (Optional.) Enable GR
helper.
graceful-restart helper enable
By default, GR helper is enabled.