HPE FlexNetwork 5510 HI Series User Manual

287
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view.
bgp
as-number [
instance
instance-name ]
N/A
3. Enable logging for session
state changes globally.
log-peer-change
By default, logging for session
state changes is enabled globally.
4. (Optional.) Enter BGP-VPN
instance view.
ip vpn-instance
vpn-instance-name
N/A
5. Enable logging for session
state changes for a peer or
peer group.
peer
{ group-name | ipv4-address
[ mask-length ] }
log-change
By default, logging for session
state changes is enabled for all
peers or peer groups.
To enable logging for session state changes (IPv6 unicast/IPv6 multicast):
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view.
bgp
as-number [
instance
instance-name ]
N/A
3. Enable logging for session
state changes globally.
log-peer-change
By default, logging for session
state changes is enabled globally.
4. (Optional.) Enter BGP-VPN
instance view.
ip vpn-instance
vpn-instance-name
N/A
5. Enable logging for session
state changes for a peer or
peer group.
peer
{ group-name | ipv6-address
[ prefix-length ] }
log-change
By default, logging for session
state changes is enabled for all
peers or peer groups.
Enabling logging for BGP route flapping
This feature enables BGP to generate logs for BGP route flappings that trigger log generation. The
generated logs are sent to the information center. For the logs to be output correctly, you must also
configure information center on the device. For more information about the information center, see
Network Management and Monitoring Configuration Guide.
To enable logging for BGP route flapping (IPv4 unicast/IPv4 multicast):
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address
family view.
• Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
N/A

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English