HPE FlexNetwork 5510 HI Series

165
To enable BFD control packet mode for IS-IS FRR:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter interface view.
interface
interface-type
interface-number
N/A
3. Enable BFD control packet
mode for IS-IS FRR.
isis primary-path-detect bfd ctrl
By default, BFD control packet
mode is disabled for IS-IS FRR.
To enable BFD echo packet mode for IS-IS FRR:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Configure the source IP
address of BFD echo packets.
bfd echo-source-ip
ip-address
By default, the source IP address
of BFD echo packets is not
configured.
The source IP address cannot be
on the same network segment as
any local interface's IP address.
For more information, see High
Availability Command Reference.
3. Enter interface view.
interface
interface-type
interface-number
N/A
4. Enable BFD echo packet
mode for IS-IS FRR.
isis primary-path-detect bfd
echo
By default, BFD echo packet
mode is disabled for IS-IS FRR.
Displaying and maintaining IS-IS
Execute display commands in any view and the reset command in user view.
Task
Command
Display IS-IS process information.
display isis
[ process-id ]
Display IS-IS GR log information.
display isis event-log graceful-restart slot
slot-number
Display the IS-IS GR status.
display isis graceful-restart status
[
level-1
|
level-2
]
[ process-id ]
Display IS-IS interface information.
display isis interface
[ [ interface-type interface-number ]
[
verbose
] |
statistics
] [ process-id ]
Display IS-IS LSDB information.
display isis lsdb
[ [
level-1
|
level-2
] |
local
|
lsp-id
lspid |
[
lsp-name
lspname ] |
verbose
] * [ process-id ]
Display IS-IS LSDB statistics.
display isis lsdb statistics
[
level-1
|
level-2
] [ process-id ]
Display the host name-to-system ID
mapping table.
display isis name-table
[ process-id ]
Display IS-IS NSR log information.
display isis event-log non-stop-routing slot
slot-number
Display the IS-IS NSR status.
display isis non-stop-routing status
Display IS-IS packet statistics.
display isis packet
{
csnp
|
hello
|
lsp
|
psnp
} [
verbose
]
[ interface-type interface-number ] [ process-id ]
Display IS-IS neighbor information.
display
isis
peer
[
statistics | verbose
] [ process-id ]