140
10 Authentication Information IIH, LSP, SNP
128 IP Internal Reachability Information LSP
129 Protocols Supported IIH, LSP
130 IP External Reachability Information L2 LSP
131 Inter-Domain Routing Protocol Information L2 LSP
132 IP Interface Address IIH, LSP
222 MT-ISN LSP
229 M-Topologies IIH, LSP
235 MT IP. Reach LSP
237 MT IPv6 IP. Reach LSP
Protocols and standards
• ISO 10589 ISO IS-IS Routing Protocol
• ISO 9542 ES-IS Routing Protocol
• ISO 8348/Ad2 Network Services Access Points
• RFC 1195, Use of OSI IS-IS for Routing in TCP/IP and Dual Environments
• RFC 2763, Dynamic Hostname Exchange Mechanism for IS-IS
• RFC 2966, Domain-wide Prefix Distribution with Two-Level IS-IS
• RFC 3277, IS-IS Transient Blackhole Avoidance
• RFC 3358, Optional Checksums in ISIS
• RFC 3373, Three-Way Handshake for IS-IS Point-to-Point Adjacencies
• RFC 3567, Intermediate System to Intermediate System (IS-IS) Cryptographic Authentication
• RFC 3719, Recommendations for Interoperable Networks using IS-IS
• RFC 3786, Extending the Number of IS-IS LSP Fragments Beyond the 256 Limit
• RFC 3787, Recommendations for Interoperable IP Networks using IS-IS
• RFC 3847, Restart Signaling for IS-IS
• RFC 4444, Management Information Base for Intermediate System to Intermediate System
(IS-IS)
• RFC 5303, Three-Way Handshake for IS-IS Point-to-Point Adjacencies
• RFC 5310, IS-IS Generic Cryptographic Authentication
IS-IS configuration task list
Configuring basic IS-IS:
• (Required.) Enabling IS-IS
• (Optional.) Setting the IS level and circuit level
• (Optional.) Configuring P2P network type for an interface