EasyManuals Logo

HPE FlexNetwork 5510 HI Series User Manual

HPE FlexNetwork 5510 HI Series
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #276 background imageLoading...
Page #276 background image
264
Enabling nonstandard BGP ORF capabilities
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view
or BGP-VPN instance
view.
• Enter BGP instance view:
bgp as-number [ instance
instance-name ]
• Enter BGP-VPN instance view:
a. bgp as-number [ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
N/A
3. Enable nonstandard BGP
ORF capabilities.
peer
{
group-name
|
ip-address
[
mask-length
]
| ipv6-address
[ prefix-length ] }
capability-advertise orf
non-standard
By default, nonstandard BGP
ORF capabilities are disabled.
To enable the BGP peers to
exchange nonstandard ORF
information, you must configure
this command together with the
peer
capability-advertise orf
prefix-list
command.
Enabling 4-byte AS number suppression
BGP supports 4-byte AS numbers. The 4-byte AS number occupies four bytes, in the range of 1 to
4294967295. By default, a device sends an Open message to the peer device for session
establishment. The Open message indicates that the device supports 4-byte AS numbers. If the peer
device supports 2-byte AS numbers instead of 4-byte AS numbers, the session cannot be
established. To resolve this issue, enable the 4-byte AS number suppression feature. The device
then sends an Open message to inform the peer that it does not support 4-byte AS numbers, so the
BGP session can be established.
If the peer device supports 4-byte AS numbers, do not enable the 4-byte AS number suppression
feature. Otherwise, the BGP session cannot be established.
To enable 4-byte AS number suppression (IPv4 unicast/multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view or
BGP-VPN instance view.
• Enter BGP instance view:
bgp as-number [ instance
instance-name ]
• Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
N/A
3. Enable 4-byte AS number
suppression.
peer
{ group-name | ipv4-address
[ mask-length ] }
capability-advertise
suppress-4-byte-as
By default, 4-byte AS number
suppression is disabled.
To enable 4-byte AS number suppression (IPv6 unicast/multicast address family):

Table of Contents

Other manuals for HPE FlexNetwork 5510 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork 5510 HI Series and is the answer not in the manual?

HPE FlexNetwork 5510 HI Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork 5510 HI Series
CategorySwitch
LanguageEnglish

Related product manuals