258
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
3. Configure the SoO attribute
for a peer or peer group.
peer
{ group-name | ipv4-address
[ mask-length ] }
soo
site-of-origin
By default, no SoO attribute is
configured for a peer or peer
group.
To configure the SoO attribute (IPv6 unicast/multicast address family):
1. Enter system view.
system-view
N/A
2. Enter BGP IPv6 unicast
address family view,
BGP-VPN IPv6 unicast
address family view, or BGP
IPv6 multicast address family
view.
• Enter BGP IPv6 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv6
[ unicast ]
• Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv6
N/A
3. Configure the SoO attribute
for a peer or peer group.
peer
{ group-name | ipv6-address
[ prefix-length ] }
soo
site-of-origin
By default, no SoO attribute is
configured for a peer or peer
group.
Tuning and optimizing BGP networks
This section describes how to tune and optimize BGP networks.
To Next Page
Loading...
Need help?
General