HPE FlexNetwork 5510 HI Series

10
Task
Command
Display route attribute information in
the IPv6 RIB.
display ipv6 rib attribute
[ attribute-id ]
Display IPv6 RIB GR state
information.
display ipv6 rib graceful-restart
Display next hop information in the
IPv6 RIB.
display ipv6 rib nib
[
self-originated
] [ nib-id ] [
verbose
]
display ipv6 rib nib protocol
protocol [
verbose
]
Display next hop information for IPv6
direct routes.
display ipv6 route-direct nib
[ nib-id ] [
verbose
]
Display support for IPv6 routes with
prefixes longer than 64 bits.
display switch-routing-mode status
Clear IPv6 route statistics.
reset ipv6 routing-table statistics protocol
[
vpn-instance
vpn-instance-name ] { protocol |
all
}