HPE FlexNetwork 5510 HI Series User Manual

211
Step
Command
Remarks
2. Enter BGP instance view
or BGP-VPN instance
view.
• Enter BGP instance view:
bgp as-number [ instance
instance-name ]
• Enter BGP-VPN instance view:
a. bgp as-number [ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
N/A
3. Specify devices in a
network as dynamic BGP
peers and specify an AS
number for the peers.
peer
ipv4-address mask-length
as-number
as-number
By default, no dynamic BGP
peers exist.
4. (Optional.) Configure a
description for dynamic
BGP peers.
peer
ipv4-address mask-length
description
text
By default, no description is
configured for dynamic BGP
peers.
5. Create the BGP IPv4
unicast address family or
BGP-VPN IPv4 unicast
address family and enter
its view.
address-family ipv4
[
unicast
]
By default, no BGP IPv4
unicast address family or
BGP-VPN IPv4 unicast
address family exists.
6. Enable BGP to exchange
IPv4 unicast routing
information with dynamic
BGP peers in the
specified network.
peer
ipv4-address mask-length
enable
By default, BGP cannot
exchange IPv4 unicast routing
information with dynamic BGP
peers.
Configuring dynamic BGP peers (IPv6 unicast address family)
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view
or BGP-VPN instance
view.
• Enter BGP instance view:
bgp as-number [ instance
instance-name ]
• Enter BGP-VPN instance view:
a. bgp as-number [ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
N/A
3. Specify devices in a
network as dynamic BGP
peers and specify an AS
number for the peers.
peer
ipv6-address prefix-length
as-number
as-number
By default, no dynamic BGP
peers exist.
4. (Optional.) Configure a
description for dynamic
BGP peers.
peer
ipv6-address prefix-length
description
text
By default, no description is
configured for dynamic BGP
peers.
5. Create the BGP IPv6
unicast address family or
BGP-VPN IPv6 unicast
address family and enter
its view.
address-family ipv6
[
unicast
]
By default, no BGP IPv6
unicast address family or
BGP-VPN IPv6 unicast
address family exists.
6. Enable BGP to exchange
IPv6 unicast routing
information with dynamic
BGP peers in the
peer
ipv6-address prefix-length
enable
By default, BGP cannot
exchange IPv6 unicast routing
information with dynamic BGP
peers.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English