HPE FlexNetwork 5510 HI Series

235
Step
Command
Remarks
to a peer or peer group:
peer { group-name |
ipv4-address
[ mask-length ] }
route-policy
route-policy-name export
• Reference an ACL to filter
BGP routes advertised to a
peer or peer group:
peer { group-name |
ipv4-address
[ mask-length ] } filter-policy
ipv4-acl-number export
• Reference an AS path list to
filter BGP routes advertised
to a peer or peer group:
peer { group-name |
ipv4-address
[ mask-length ] } as-path-acl
as-path-acl-number export
• Reference an IPv4 prefix list
to filter BGP routes
advertised to a peer or peer
group:
peer { group-name |
ipv4-address
[ mask-length ] } prefix-list
prefix-list-name
export
To configure BGP route distribution filtering policies (IPv6 unicast/multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP IPv6 unicast
address family view,
BGP-VPN IPv6 unicast
address family view, or BGP
IPv6 multicast address family
view.
• Enter BGP IPv6 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv6
[ unicast ]
• Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv6
multicast
N/A