252
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
3. Permit the local AS number
to appear in routes from a
peer or peer group and set
the appearance times.
peer
{ group-name | ipv4-address
[ mask-length ] }
allow-as-loop
[ number ]
By default, the local AS number is
not allowed in routes from a peer
or peer group.
To permit the local AS number to appear in routes from a peer or peer group and specify the
appearance times (IPv6 unicast/multicast address family):
1. Enter system view.
system-view
N/A
2. Enter BGP IPv6 unicast
address family view,
BGP-VPN IPv6 unicast
address family view, or BGP
IPv6 multicast address family
view.
• Enter BGP IPv6 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv6
[ unicast ]
• Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv6
N/A
3. Permit the local AS number
to appear in routes from a
peer or peer group and set
the appearance times.
peer
{ group-name | ipv6-address
[ prefix-length ] }
allow-as-loop
[ number ]
By default, the local AS number is
not allowed in routes from a peer
or peer group.
To Next Page
Loading...
Need help?
General