169
Views
System view
Predefined user roles
network-admin
Parameters
value: Specifies alarm threshold as a percentage of 1 to 99.
pse pse-id: Specifies a PSE by its ID.
Usage guidelines
If PSE power usage crosses the threshold multiple times in succession, the system sends
notification messages only for the first crossing. For more information, see "Configuring SNMP."
Examples
# Set the power alarm threshold of PSE 7 to 90%.
<Sysname> system-view
[Sysname] poe utilization-threshold 90 pse 7
To Next Page
Loading...
