HPE FlexNetwork MSR3044

209
snmp-agent target-host inform address udp-domain { ipv4-address | ipv6 ipv6-address }
[ udp-port port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string
{ v2c | v3 [ authentication | privacy ] }
snmp-agent target-host trap address udp-domain { ipv4-address | ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string [ v1 | v2c
| v3 [ authentication | privacy ] ]
undo snmp-agent target-host { trap | inform } address udp-domain { ipv4-address | ipv6
ipv6-address } params s
ecurityname security-string [ vpn-instance vpn-instance-name ]
In FIPS mode:
snmp-agent target-host inform address udp-domain { ipv4-address | ipv6 ipv6-address }
[ udp-port port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string
v3 { authentication | privacy }
snmp-agent target-host trap address udp-domain { ipv4-address | ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string v3
{ authentication | privacy }
undo snmp-agent target-host { trap | inform } address udp-domain { ipv4-address | ipv6
ipv6-address } params s
ecurityname security-string [ vpn-instance vpn-instance-name ]
Default
No SNMP notification target hosts exist.
Views
System view
Predefined user roles
network-admin
Parameters
inform: Sends notifications as informs.
trap: Sends notifications as traps.
address: Specifies the destination address of SNMP notifications.
udp-domain: Specifies UDP as the transport protocol.
ipv4-address: Specifies a target host by its IPv4 address or host name. The host name is a
case-insensitive string of 1 to 253 characters. The string can only contain letters, numbers, hyphens
(-), underscores (_), and dots (.). If you specify a host name, the IPv4 address of the target host can
be obtained.
ipv6 ipv6-address: Specifies a target host by its IPv6 address or host name. The host name is a
case-insensitive string of 1 to 253 characters, which only contains letters, numbers, hyphens (-),
underscores (_), and dots (.). If you specify a host name, the IPv6 address of the target host can be
obtained. If you specify an IPv6 address, the address cannot be a link local address.