HPE FlexNetwork MSR3044 User Manual

221
For more information about ACL, see ACL and QoS Configuration Guide.
Examples
In VACM mode:
# Add the user testUser to the SNMPv3 group testGroup, and enable the authentication without
privacy security model for the group. Specify the authentication algorithm SHA-1 and the
authentication key 123456TESTplat&! in plain text for the user.
<Sysname> system-view
[Sysname] snmp-agent group v3 testGroup authentication
[Sysname] snmp-agent usm-user v3 testUser testGroup simple authentication-mode sha
123456TESTplat&!
# For an NMS to access the MIB objects in the default view ViewDefault, make sure the following
configurations on the NMS are the same as the SNMP agent:
• SNMPv3 username.
• SNMP protocol version.
• Authentication algorithm and key.
# Add the user testUser to the SNMPv3 group testGroup, and enable the authentication and
privacy security model for the group. Specify the authentication algorithm SHA-1, the privacy
algorithm AES, the plaintext authentication key 123456TESTauth&!, and the plaintext privacy key
123456TESTencr&! for the user.
<Sysname> system-view
[Sysname] snmp-agent group v3 testGroup privacy
[Sysname] snmp-agent usm-user v3 testUser testGroup simple authentication-mode sha
123456TESTauth&! privacy-mode aes128 123456TESTencr&!
# For an NMS to access the MIB objects in the default view ViewDefault, make sure the following
configurations on the NMS are the same as the SNMP agent:
• SNMPv3 username.
• SNMP protocol version.
• Authentication algorithm.
• Privacy algorithm.
• Plaintext authentication and privacy keys.
# Add the user remoteUser for the SNMP remote engine at 10.1.1.1 to the SNMPv3 group
testGroup, and enable the authentication and privacy security model for the group. Specify the
authentication algorithm SHA-1, the privacy algorithm AES, the plaintext authentication key
123456TESTauth&!, and the plaintext privacy key 123456TESTencr&! for the user.
<Sysname> system-view
[Sysname] snmp-agent remote 10.1.1.1 engineid 123456789A
[Sysname] snmp-agent group v3 testGroup privacy
[Sysname] snmp-agent usm-user v3 remoteUser testGroup remote 10.1.1.1 simple
authentication-mode sha 123456TESTauth&! privacy-mode aes128 123456TESTencr&!
In RBAC mode:

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English