13
Table 4 Command output
Field Description
traceroute to 2001:3::2
Display the route that the IPv6 packets traverse from the current device
to the device whose IP address is 2001:3:2.
hops at most
Maximum number of hops of the probe packets, which can be set by the
-m
keyword.
byte packets Number of bytes of a probe packet.
2 2001:2::2 [AS 100] 0.861 ms
0.718 ms 0.679 ms
Probe result of the probe packets that contain a hoplimit value of 2,
including the following information about the second hop:
• IPv6 address of the hop.
• Number of the AS the hop belongs to. The AS number appears
only when it is found for the hop in the specified routing table.
• The round-trip time of the probe packets.
The number of packets that can be sent in each probe can be set by
using the
-q
keyword.
To Next Page
Loading...
Need help?
General
