337
For example, a monitor policy has four actions numbered from 1 to 4. The policy has user roles that
are required for performing actions 1, 3, and 4, but it does not have the user role required for
performing action 2. When the policy is triggered, EAA executes only action 1.
A monitor policy supports a maximum of 64 valid user roles. User roles added after this limit is
reached do not take effect.
You cannot assign a monitor policy user roles that have higher privilege than the user roles you are
logged in with.
Examples
# Assign user roles to a CLI-defined policy.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] user-role network-admin
[Sysname-rtm-test] user-role admin
To Next Page
Loading...
Need help?
General
