389
Syntax
Centralized devices in standalone mode:
monitor thread [ dumbtty ] [ iteration number ]
Distributed devices in standalone mode/centralized devices in IRF mode:
monitor thread [ dumbtty ] [ iteration number ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
monitor thread [ dumbtty ] [ iteration number ] [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
dumbtty: Specifies dumbtty mode. In this mode, the command displays all thread statistics in
descending order of CPU usage without refreshing statistics. If you do not specify the keyword, the
command displays statistics for top 10 processes in descending order of CPU usage in an interactive
mode, and refreshes statistics every 5 seconds by default.
iteration number: Specifies the number of display times, in the range of 1 to 4294967295. If you
specify the dumbtty keyword, the number argument is 1 by default. If neither the dumbtty keyword
nor the number argument is specified, there is no limit to the display times.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays thread statistics for the active MPU. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for the master device. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for the global active MPU. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)
Usage guidelines
If you do not specify the dumbtty keyword, the command displays thread statistics in an interactive
mode. In this mode, the system automatically determines the number of displayed thread processes
according to the screen size and does not display exceeding processes. You can also input
interactive commands as shown in Table 78 to perfo
rm relevant operations.
To Next Page
Loading...
Need help?
General
