Figure 12-14 Configuration procedure for Layer 2 interoperation between branches of an
enterprise
The following table lists the detailed description steps.
Item Procedure Remarks
OLT Adding an ONU to an OLT This topic describes how to add ONUs to the
OLT. ONUs can be configured only after
they are added to the OLT successfully.
OLT Configuring Layer 2
Interoperation Service Ports on
OLT
None
OLT Configuring Congestion Control
and Security Policies
This topic describes how to configure global
priority-based scheduling policies for
upstream queues to ensure service reliability
and configure global security policies to
ensure service security.
OLT Configuring E2E Reliability The upstream and downstream networking
protection ensures the E2E reliability. Link
aggregation and protection groups can be
configured for upstream networking
protection. Type x protection for PON ports
can be configured for downstream
networking protection.
OLT Verifying Services None
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
12 FTTO Configuration(SOHO and SME)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1236