Huawei SmartAX MA5608T User Manual

1.1 Commissioning Introduction
The topic describes the commissioning definition and procedure.
1.1.1 Commissioning Definition
Commissioning refers to the stand-alone commissioning, the interconnection commissioning,
and the maintenance and management commissioning after the hardware installation. This
ensures that the device works in the normal state according to the design specifications.
1.1.2 Commissioning Procedure
This topic describes the procedure for commissioning the device.
Flowchart
Perform the commissioning according to the flowchart.
Figure 1-1 shows the commissioning procedure.
Figure 1-1 Commissioning procedure
Commissioning Item
The commissioning items in the commissioning procedure are described as follows:
Commissioning Preparations
This topic describes the hardware, software, and tool preparations for the commissioning.
Stand-Alone Commissioning
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE