EasyManua.ls Logo

Huawei SmartAX MA5608T - Configuring MA5600 TMA5603 TMA5608 T-3

Huawei SmartAX MA5608T
1979 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
huawei(config-btv)#igmp cascade-port 0/19/0
huawei(config-btv)#igmp cascade-port 0/19/1
l Modify the subtending port.
huawei(config-btv)#igmp cascade-port modify 0/19/0 static enable
huawei(config-btv)#igmp cascade-port modify 0/19/1 static enable
huawei(config-btv)#quit
Step 15 Save the data.
huawei(config)#save
----End
5.5 Configuring MA5600T/MA5603T/MA5608T-3
This topic describes how to configure MA5600T/MA5603T/MA5608T-3.
Procedure
Step 1 Confirm the board.
huawei>enable
huawei#config
huawei(config)#board confirm 0
Step 2 Configure the NMS.
1. Configure the IP address of the inband NMS interface.
l Create the NMS VLAN.
huawei(config)#vlan 10 standard
l Add the upstream port.
huawei(config)#port vlan 10 0/19 0-1
l Enter the NMS VLAN interface mode.
huawei(config)#interface vlanif 10
l Configure the IP address of the NMS VLAN interface.
huawei(config-if-vlanif10)#ip address 10.10.1.4 255.255.255.0
huawei(config-if-vlanif10)#quit
2. Add the route.
l Configure the route destined to the NMS (Trap destination host).
huawei(config)#ip route-static 2.2.2.0 255.255.255.0 10.10.1.1
preference 1
l Configure the route destined to the time server.
huawei(config)#ip route-static 4.4.4.0 255.255.255.0 10.10.1.1
preference 1
l Configure the route destined to the log host.
huawei(config)#ip route-static 3.3.3.0 255.255.255.0 10.10.1.1
preference 1
huawei(config)#ip route-static 3.3.4.0 255.255.255.0 10.10.1.1
preference 1
3. Add the ACL rule.
huawei(config)#acl 3050
huawei(config-acl-adv-3050)#rule permit ip source any destination any
huawei(config-acl-adv-3050)#rule deny ip source any destination 10.10.1.2
0.0.0.0
huawei(config-acl-adv-3050)#rule permit ip source 2.2.2.2 0.0.0.0
destination 10.10.1.2 0.0.0.0
huawei(config-acl-adv-3050)#rule permit ip source 2.2.2.3 0.0.0.0
destination 10.10.1.2 0.0.0.0
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
5 Configuration Example of MSTP Subtending Network
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
465

Table of Contents

Other manuals for Huawei SmartAX MA5608T

Related product manuals