Table 1-55 SHDSL alarm profile
Profil
e
Index
Profile Parameter Factory Default
1 DEFV
AL
Loop attenuation threshold (unit:dB) 0
SNR margin threshold (unit:dB) 0
ES threshold (unit:second) 0
SES threshold (unit:second) 0
CRC anomaly threshold 0
LOSWS threshold (unit:second) 0
UAS threshold (unit:second) 0
Dying gasp alarm switch Enable
Reference status Unused
1.6.3.3 Default settings of the system parameters
The following table lists the default settings of the system parameters on the MA5600T/
MA5603T/MA5608T.
Table 1-56 System parameters
Index Description Default
0 Sending howler tone flag, 0:not send, 1:send 1
1 Overseas version flag, 0:China, 1:HongKong, 2:Brazil,
3:Egypt, 4:Singapore, 5:Thailand, 6:France, 7:Britain
MSFUK, 8:Britain ETSI, 9:Bulgaria
0
2 Stop initial ringing flag, 0:not send, 1:send 0
3 The mode of voicemail, 0:high voltage, 1:FSK and ring,
2:FSK no ring
1
4 Global digitmap support flag 0:Not support, 1:Support 1
5 Transfer mode of media stream in a device, 0:Device
internal forwarding, 1:Device external forwarding
0
6 RTP 2833 Payload Type 97
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
209
To Next Page
Loading...
Need help?
General
