Follow-up Procedure
You can collect the packet statistics to check whether the CESoP and TDM connections are
normal.
l Collect the statistics of packets sent and received by the CESoP connection on the ONU.
huawei(config)#display cesop-connect statistics 0
------------------------------------------------------
CONNECTID : 0
------------------------------------------------------
Lost Packet Count: 0
Received Packet Count: 58733
Transmitted Packet Count: 58732
Overflow Jitter Buffer Times: 0
Underflow Jitter Buffer Times: 0
Received Abnormal Packet Count: 0
Received Sn-error Packet Count: 0
Received Ssrc-error Packet Count: 0
------------------------------------------------------
In the command output, the number of received packets must be the same as that of sent
packets.
l Collect the statistics of packets sent and received by the TDM connection on the OLT.
huawei(config)#display tdm-connect statistics 0
---------------------------------------------------------------
Statistics on ONU side:
Discarded Packets : 0
Received Packets : 132252
Transmitted Packets : 132253
Received Error CESoP Packets : 0
Received SN Error CESoP Packets : 0
Received SSRC Error CESoP Packets : 0
-------------------------------------------------------------
In the command output, the number of received packets must be the same as that of sent
packets.
14.4.8 Small-Cell Base Station Access Service (in QinQ VLAN
through CLI Configuration)
Dock ONUs are connected to small-cell base stations through Ethernet ports, and OLTs
interconnect with the devices on the metro network through QinQ VLANs to provide the access
service for small-cell base stations. This topic describes how to implement the access service of
a small-cell base station through the CLI in the scenario without the U2000 NMS.
14.4.8.1 Service Requirements and Application Scenarios
Service Requirements
As the last mile that connects users to the Internet, small-cell backhaul is an important part of
an FTTx network. For small-cell backhaul, customers expect to:
l Make full use of the existing access resources to provide backhaul services for distributed
small-cell base stations.
l Use a simple and mature service configuration scheme, featuring a high transmission
efficiency in addition to ensuring the QoS.
l Simplify sites to lower the site installation and maintenance costs.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
14 FTTM Configuration (Base Station Access)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1496
To Next Page
Loading...
Need help?
General
