Huawei SmartAX MA5608T User Manual

Adding ONUs to OLT
Configuring Layer 2
Interoperation Service
Service Ports
Configuring Management
Service Ports on OLT
and ONUs
Start
Configuring Congestion
Control and Security
Policies
Verifying Layer 2
Interoperation Service
End
OLT Side
ONU Side
Configuring Ethernet
Access Service Ports
Configuring E2E
Reliability
NOTE
An OLT can connect to multiple ONUs (for enterprise branches). Configurations for different ONUs are similar.
Therefore, this document uses two ONUs (ONU1 and ONU2) as example to describe how to configure Layer
2 interoperation.
13.3.1.3 Adding ONUs to OLT
This topic describes how to add ONUs to the OLT. ONUs can be configured only after they are
added to the OLT successfully.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
13 FTTO Configuration (Large-sized Enterprise Access)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1271

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE