Huawei SmartAX MA5608T User Manual

IPv4 IPv6 IPv6 Multicast Supported
or Not
igmp proxy router timeout - Not supported
Multicast additional function
igmp leave-proxy igmp ipv6 leave-proxy Supported
igmp priority igmp ipv6 priority Supported
imgp report-proxy igmp ipv6 report-proxy Supported
igmp accelerator - Not supported
igmp echo - Not supported
igmp encapsulation - Not supported
igmp multicast-tag - Not supported
igmp policy - Not supported
igmp query-offline-user - Not supported
igmp user-action-report - Not supported
igmp mismatch - Not supported
display igmp policy - Not supported
igmp sip-gip-forward - Not supported
Statistics
igmp statistic reset igmp ipv6 statistic reset Supported
display igmp statistic display igmp ipv6 statistic Supported
display multicast flow-
statistic
- Not supported
Log
display igmp log statistic - Not supported
NOTE
The multicast commands that are not listed in this table are the commands shared by the IPv4 multicast
and IPv6 multicast.
19.2.2 Configuration Differences Between IPv6 and IPv4 on the
ONU
Configurations between IPv6 and IPv4 on the ONU vary in the ACL, security feature, and IPTV
multicast service.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
19 IPv6 Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1878

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE