Item Step Description
Optical
line
termina
l (OLT)
10.6.2.3 Adding an ONU to an
OLT
Services can be configured for an optical
network unit (ONU) only after the ONU is
added to an optical line terminal (OLT).
OLT 10.6.1.4 Configuring a VDSL2
User Port
Services can be transmitted only after a
VDSL2 port on an optical network unit
(ONU) is activated.
OLT
HGW
10.6.2.5 Configuring the Internet
Access Service
l An ONU provides only Layer 2 service
channels, which do not require
configuration. An HGW is equipped
with an integrated access device (IAD)
provides the Internet access, VoIP, and
IPTV services for users.
l IPTV services include the BTV and VoD
services that are different in
configuration procedures and need to be
configured separately.
10.6.2.6 Configuring the Voice
Service
Configure the
IPTV service.
10.6.2.7
Configuring
the BTV
Service
10.6.2.8
Configuring
the VoD
Service
OLT 10.6.2.9 Verifying Services The OLT provides remote verification
methods including ONT PPPoE/DHCP
dialup emulation and multicast emulation
for configuration and commissioning
engineers to verify services remotely after
service configuration, avoiding a second on-
site operation.
10.6.2.3 Adding an ONU to an OLT
Services can be configured for an optical network unit (ONU) only after the ONU is added to
an optical line terminal (OLT).
Data Plan
Table 10-5 Data plan
Item Data
DBA profile Profile name: fttd_dba
Profile type: type3
Assured bandwidth: 8 Mbit/s
Maximum bandwidth: 20 Mbit/s
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 10 FTTD Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
788
To Next Page
Loading...
Need help?
General
