Huawei SmartAX MA5608T - Default Settings of the GPON ONT Service Profile; Factory Defaults of a GPON ONT Alarm Profile

1.6.3.7 Default settings of the GPON ONT service profile
The following table lists the default settings of the GPON ONT service profile on the MA5600T/
MA5603T/MA5608T.
Table 1-68 GPON ONT service profile
Parameter Name Default
Port-type POTS Port-
number
0
ETH 0
TDM 0
MOCA 0
CATV 0
TDM port type E1
TDM service type TDMoGem
MAC learning function switch Enable
ONT transparent function
switch
Disable
Multicast forward mode Unconcern
Multicast forward VLAN -
Multicast mode Unconcern
Upstream IGMP packet
forward mode
Unconcern
Upstream IGMP packet
forward VLAN
-
1.6.3.8 Factory Defaults of a GPON ONT Alarm Profile
The following table lists the factory defaults of a GPON ONT alarm profile on the MA5600T/
MA5603T/MA5608T.
Table 1-69 GPON ONT alarm profile
Profile
Index
Profile Parameter Factory Default
1 alarm-
profile_
1
GEM port loss of packets threshold 0
GEM port misinserted packets
threshold
0
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
214