Huawei SmartAX MA5608T User Manual

Profile
Index
Profile Parameter Factory Default
GEM port impaired blocks threshold 0
Ethernet FCS errors threshold 0
Ethernet excessive collision count
threshold
0
Ethernet late collision count threshold 0
Too long Ethernet frames threshold 0
Ethernet buffer (Rx) overflows
threshold
0
Ethernet buffer (Tx) overflows
threshold
0
Ethernet single collision frame count
threshold
0
Ethernet multiple collisions frame
count threshold
0
Ethernet SQE count threshold 0
Ethernet deferred transmission count
threshold
0
Ethernet internal MAC Tx errors
threshold
0
Ethernet carrier sense errors threshold 0
Ethernet alignment errors threshold 0
Ethernet internal MAC Rx errors
threshold
0
PPPOE filtered frames threshold 0
MAC bridge port discarded frames
due to delay threshold
0
MAC bridge port MTU exceeded
discard frames threshold
0
MAC bridge port received incorrect
frames threshold
0
CES general error time threshold 0
CES severely time threshold 0
CES bursty time threshold 0
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
215

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE