11 FTTB and FTTC Solution Configuration
About This Chapter
The FTTB and FTTC solution configuration guide describes how to configure typical FTTB/C
services (such as high-speed Internet access, multicast, and VoIP) on the OLT and the ONU step
by step through examples.
11.1 FTTB and FTTC Service Overview
This topic describes FTTB and FTTC services from basic concepts, network scenarios, typical
configurations, and ONU capability sets to provide necessary background information for FTTB
and FTTC service configuration in different scenarios.
11.2 Principle of FTTB and FTTC Data Plan
This topic describes principles of data plan for various FTTB and FTTC networking diagrams
in terms of device management, QoS, services, and security. The examples in this topic are based
on these principles to plan data.
11.3 Configuring Services in Various FTTB and FTTC Scenarios (GPON and 10G GPON
Access)
This topic describes how to configure the Internet access service, voice service and multicast
service in GPON/10G GPON access mode in FTTB/FTTC networking scenarios.
11.4 Configuring Services in Various FTTB and FTTC Scenarios (Ethernet Cascading)
This section describes how to configure services when a multi-dwelling unit (MDU) serving as
an independent node or GE remote extended subrack cascades with an optical line terminal
(OLT)through Ethernet port.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
11 FTTB and FTTC Solution Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
814
To Next Page
Loading...
Need help?
General
