Huawei SmartAX MA5608T User Manual

This section describes how to configure services, including the Internet access service, voice
service, and VoD service, on an optical line terminal (OLT) when a distributed cable modem
termination system (D-CMTS) works as a GE remote extended frame on a Layer 3 network.
The MA5603T equipped with the SCUV, ETHB, and SPUF boards is used as an example.
15.5 Service Configuration on a D-CMTS That Works as a GPON Remote Extended Frame on
a Layer 2 Telecom Network
This section describes how to configure services, including home services, L2VPN enterprise
service, and wireless local area network (WLAN) hotspot radio backhaul service, on an optical
line terminal (OLT) when a distributed cable modem termination system (D-CMTS) works as
a GPON extended frame on a Layer 2 telecom network. The MA5603T equipped with the SCUV,
GPMD, and SPUF boards is used as an example.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
15 OptiCable D-CMTS Configuration (MA5633 Working as
a Remote Extended Frame)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1516

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE