CM
Status
Description Handling Suggestion
l ol
l ol-pt
l ol-
ptd
l ol-d
l wol
l wol-
pt
l wol-
ptd
l wol-
d
l pol
l pol-
pt
l pol-
ptd
l ol: indicates that the CM is
online. (valid only for CMs
complying with DOCSIS 2.0)
l ol-pt: indicates that the CM is
online and passes the BPI
authentication. (valid only for
CMs complying with DOCSIS
2.0)
l ol-ptd: indicates that the CM is
online and passes the BPI
authentication, and
NetAccessEnable is disabled.
(valid only for CMs complying
with DOCSIS 2.0)
l ol-d: indicates that the CM is
online and NetAccessEnable is
disabled. (valid only for CMs
complying with DOCSIS 2.0)
l wol: indicates that the CM is
online and all channels bound to
the CM are available. (valid
only for CMs complying with
DOCSIS 3.0)
l wol-pt: indicates that the CM is
online and passes the BPI
authentication, and all channels
bound to the CM are available.
(valid only for CMs complying
with DOCSIS 3.0)
l wol-ptd: indicates that the CM
is online and passes the BPI
authentication,
NetAccessEnable is disabled,
and all channels bound to the
CM are available. (valid only
for CMs complying with
DOCSIS 3.0)
l wol-d: indicates that the CM is
online, NetAccessEnable is
disabled, and all channels bound
to the CM are available. (valid
only for CMs complying with
DOCSIS 3.0)
l pol: indicates that the CM is
online and some channels
No action is required. The status
indicates that the CM has registered
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
15 OptiCable D-CMTS Configuration (MA5633 Working as
a Remote Extended Frame)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1660
To Next Page
Loading...
Need help?
General
