Priority Policy : local-
pri
CIR :
off
CBS :
off
PIR :
off
PBS :
off
Referenced Status : not
used
------------------------------------------------
huawei(config)#traffic table ip index 21 cir off priority 5 priority-policy
local-Setting
Create traffic descriptor record
successfully
------------------------------------------------
TD Index :
21
TD Name : ip-traffic-
table_21
Priority :
5
Copy Priority :
-
Mapping Index :
-
CTAG Mapping Priority:
-
CTAG Mapping Index :
-
CTAG Default Priority:
0
Priority Policy : local-
pri
CIR :
off
CBS :
off
PIR :
off
PBS :
off
Referenced Status : not
used
------------------------------------------------
huawei(config)#service-port 1 vlan 200 gpon 0/3/1 ont 1 gem port 1 multi-
service
user-vlan 200 inbound traffic-table index 20 outbound traffic-table index 20
huawei(config)#service-port 2 vlan 100 gpon 0/3/1 ont 1 gem port 2 multi-
service
user-vlan 100 inbound traffic-table index 21 outbound traffic-table index 21
10. Configure the bridging function for GOOSE packets.
a. Disable the unknown multicast suppression function.
Goose packets are unknown multicast packets. Disable the unknown multicast
suppression function on the OLT to ensure that GOOSE packets are not lost.
huawei(config)#multicast-unknown policy service-port 2 transparent
huawei(config)#vlan service-profile profile-id 20
huawei(config-vlan-srvprof-20)#packet-policy multicast forward
Info: Please use the commit command to make modifications take
effect
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
17 Electrical Service Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1824
To Next Page
Loading...
Need help?
General
