Huawei SmartAX MA5608T - Page 1918

Item Data Memo
Media and signaling
upstream VLANs
200 H.248 protocol is adopted in this
example.
Media and signaling
upstream port
0/0/1
Media IP address and
signaling IP address
11.11.11.11/24
Default gateway IP
address
11.11.11.11/24
MG interface ID 0
Signaling port ID 2944
IP address of the
primary MGC
200.200.200.200/24
Port ID of the
primary MGC
2944
Coding Text
Transmission mode UDP
H248 version that
MG starts to
negotiate
1 (the negotiation starts
from V1)
Phone number 83110001-83110024
Terminal
identification
Terminal layering is not
supported and the terminal
identification ranges from 0
to 23.
User priority Cat2 for phone 1
Cat3 for phone 2 to phone
24 (default)
User type Common user (DEL user
by default)
System parameter Default value
Overseas parameter Default value
PSTN port attribute Polarity-reversal
Ringing current
attribute
Default value
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
19 IPv6 Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1893