Huawei SmartAX MA5608T User Manual

To... Run the Command...
Query events by event
type
display event history eventtype type [ detail | list | start-number
number]
Query events by event
class
display event history eventclass class [ detail | list | start-
number number]
Query events by event
level
display event history eventlevel level [ detail | list | start-
number number]
Query events by event
time
display event history eventtime start start-date start-time end end-
date end-time [ start-number number ] [ detail | list | start-
number number]
Query events by event
parameter
display event history eventparameter { frameid/slotid/portid |
frameid/slotid | frameid | vlanif vlanif } [ detail | list ]
Query all the latest
events
display event history all [ detail | list ]
Procedure
Step 1 Perform an operation (such as inserting and removing a board) to generate an alarm or event.
Step 2 Run the display alarm history command to query history alarms.
Step 3 Run the display event history command to query history events.
----End
Result
You can query the alarm or event triggered by the operation you have performed.
Example
To query the history environment alarms by alarm type, do as follows:
huawei>display alarm history alarmtype
{ type<E><communication,service,process,equipment,environment> }:environment
{ <cr>|detail<K>|list<K>|start-number<U><1,1900>||<K> }:list
{ <cr>||<K> }:
Command:
display alarm history alarmtype environment list
------------------------------------------------------------------------
AlarmSN Date&Time Alarm Name/Para
------------------------------------------------------------------------
777 2009-08-21 10:18:29 The system resources usage recovers from
the overload state to the normal state
Resource Name: CPU, Current Percent: 70
765 2009-08-21 10:17:29 The system resources usage exceeds the
threshold
Resource Name: CPU, Current Percent: 86
764 2009-08-21 10:17:29 The system resources usage recovers from
the overload state to the normal state
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
189

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE