Huawei SmartAX MA5608T User Manual

Result
After the related upstream device and downstream device are configured, the triple play service
(Internet, VoIP, and IPTV services) is available.
l Internet: user 1 and user 2 can access the Internet through PPPoE dialup.
l VoIP: user 1 and user 2 can call each other.
l IPTV: user 1 can watch all the programs after being connected to port 0/2/1, and user 2 can
watch only program BTV-1 after being connected to port 0/3/1.
Configuration File
Internet:
vlan 2 smart
port vlan 0/19 0
traffic table ip index 7 cir 2048 priority 1 priority-policy local-Setting
service-port vlan 2 adsl 0/2/1 vpi 0 vci 37 rx-cttr 7 tx-cttr 7
service-port vlan 2 adsl 0/3/1 vpi 0 vci 37 rx-cttr 7 tx-cttr 7
dhcp mode layer-3 standard
dhcp-server 1 ip 20.1.1.2 20.1.1 3
save //Save the configuration.
VoIP:
vlan 3 smart
port vlan 3 0/19 0
traffic table ip index 8 cir 1024 priority 6 priority-policy local-Setting
service-port vlan 3 adsl 0/2/1 vpi 0 vci 36 rx-cttr 8 tx-cttr 8
service-port vlan 3 adsl 0/3/1 vpi 0 vci 36 rx-cttr 8 tx-cttr 8
dhcp mode layer-3 standard
dhcp-server 1 ip 20.1.1.2 20.1.1 3
interface vlanif 3
ip address 10.1.1.1 24
dhcp-server 1
quit
save //Save the configuration.
IPTV:
vlan 4 smart
port vlan 4 0/19 0
traffic table ip index 9 cir off priority 5 priority-policy local-Setting
service-port 100 vlan 4 adsl 0/2/1 vpi 0 vci 35 rx-cttr 9 tx-cttr 9
service-port 101 vlan 4 adsl 0/3/1 vpi 0 vci 35 rx-cttr 9 tx-cttr 9
dhcp mode layer-3 standard
dhcp-server 2 ip 20.2.2.2 20.2.2.3
interface vlanif 4
ip address 10.2.2.1 24
dhcp-server 2
quit
multicast-vlan 4
igmp mode proxy
igmp uplink-port 0/19/0
btv
igmp uplink-port-mode default
quit
multicast-vlan 4
igmp program add name BTV-1 ip 224.1.1.1 sourceip 10.10.10.10
igmp program add name BTV-2 ip 224.1.1.2 sourceip 10.10.10.10
btv
igmp profile profile-name profile0 program-name BTV-1 watch
igmp policy service-port 100 normal
igmp policy service-port 101 normal
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
3 Configuring the DSLAM Services
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
371

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE