EasyManuals Logo

Huawei SmartAX MA5608T User Manual

Huawei SmartAX MA5608T
1979 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #411 background imageLoading...
Page #411 background image
profile0
huawei(config-btv)#multicast-vlan 4
huawei(config-mvlan4)#igmp multicast-vlan member service-port 100
huawei(config-mvlan4)#igmp multicast-vlan member service-port 101
huawei(config-mvlan4)#quit
6. Save the data.
huawei(config)#save
----End
Result
After the relevant upstream device and downstream device are configured, the triple play service
(Internet access, VoIP, and IPTV services) is available. If any two services carry no traffic, the
third service can hold a burst of the total user bandwidth.
l Internet: user 1 and user 2 can access the Internet through PPPoE dialup.
l VoIP: user 1 and user 2 can call each other.
l IPTV: user 1 can watch all the programs after being connected to port 0/2/0, and user 2 can
watch only program BTV-1 after being connected to port 0/2/1.
Configuration File
adsl channel-profile quickadd 3 rate 32 32 10240 32 32 4096
adsl line-template quickadd 3 channel1 3 100 100
queue-scheduler strict-priority
interface adsl 0/2
deactivate 0
deactivate 1
activate 0 template-index 3
activate 1 template-index 3
alarm-config 0 1
alarm-config 1 1
quit
Internet:
vlan 2 smart
port vlan 0/19 0
traffic table ip index 7 cir 10240 priority 1 priority-policy local-Setting
service-port vlan 2 adsl 0/2/0
vpi 0 vci 35 multi-service user-vlan 20 rx-cttr 7 tx-cttr 7
service-port vlan 2 adsl 0/2/1
vpi 0 vci 35 multi-service user-vlan 20 rx-cttr 7 tx-cttr 7
dhcp mode layer-3 standard
dhcp-server 1 ip 20.1.1.2 20.1.1 3
save
VoIP:
vlan 3 smart
port vlan 3 0/19 0
traffic table ip index 8 cir 10240 priority 6 priority-policy local-Setting
service-port vlan 3 adsl 0/2/0
vpi 0 vci 35 multi-service user-vlan 30 rx-cttr 8 tx-cttr 8
service-port vlan 3 adsl 0/2/1
vpi 0 vci 35 multi-service user-vlan 30 rx-cttr 8 tx-cttr 8
dhcp mode layer-3 standard
dhcp-server 1 ip 20.1.1.2 20.1.1 3
interface vlanif 3
ip address 10.1.1.1 24
dhcp-server 1
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
3 Configuring the DSLAM Services
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
386

Table of Contents

Other manuals for Huawei SmartAX MA5608T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei SmartAX MA5608T and is the answer not in the manual?

Huawei SmartAX MA5608T Specifications

General IconGeneral
Dual Power SupplyYes
Humidity5% to 95% (non-condensing)
Uplink Slots2
Maximum GPON Ports16
Input Voltage Range-38.4 V DC to -72 V DC
Device TypeOLT
Power Supply-48 V DC
Operating Temperature-25°C to +55°C
Storage Temperature-40°C to 70°C
Switching Capacity128 Gbps
PortsGPON, XG-PON, 10GE

Related product manuals