EasyManuals Logo

Huawei SmartAX MA5608T User Manual

Huawei SmartAX MA5608T
1979 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #438 background imageLoading...
Page #438 background image
huawei(config)#multi-service-port vlan aoe board 4 vpi 0 vci 35 inbound
traffic-table index 22 outbound traffic-table index 22
Step 8 Bind the PVCs to PW 20 in batches to create an ATM PWE3 service.
Since the VPI/VCI parameters of cells on PVCs at different ports are the same, the VPI/VCI
parameters must be changed once before the cells on client-side PVCs are encapsulated into
PWs. This ensures that the VPI/VCI parameters are unique for cells on each PVC in the PW.
l Bind PVCs and PWs in batches for UBR services.
huawei(config)#multi-pw-ac-binding pvc board 2 vpi 0 vci 35 from-outvpi 0 outvci
32
from-invpi 1 invci 32 pw 20 static transmit-label 8450 receive-label 8460
l Bind PVCs and PWs in batches for VBR services.
huawei(config)#multi-pw-ac-binding pvc board 3 vpi 0 vci 35 from-outvpi 0 outvci
33
from-invpi 1 invci 33 pw 21 static transmit-label 8451 receive-label 8461
l Bind PVCs and PWs in batches for CBR services.
huawei(config)#multi-pw-ac-binding pvc board 4 vpi 0 vci 35 from-outvpi 0 outvci
34
from-invpi 1 invci 34 pw 22 static transmit-label 8452 receive-label 8462
Step 9 Query the PW status.
huawei(config)#display pw-ac-binding pvc 0/2/0 vpi 0 vci 35
Total : 1 (Up/Down : 1/0 Static/LDP : 1/0)
----------------------------------------------------------------------------
F/S/P PW PW PROTO RECEIVE TRNS PW
VPIVCI ID STATE TYPE LABEL LABEL INDEX
----------------------------------------------------------------------------
0/2/0 0 35 20 up static 8460 8450 20
----------------------------------------------------------------------------
Note : F--Frame, S--Slot, P--Port
*: Secondary
----End
Result
The ATM packets can be transparently transmitted in the MPLS network and the ATM-based
services can be provided normally.
Configuration File
vlan 300 standard
port vlan 300 0/19 1
interface loopback 0
ip address 5.5.5.5 32
quit
mpls lsr-id 5.5.5.5
mpls
mpls te
mpls rsvp-te
quit
mpls l2vpn
mpls vlan 300
interface vlanif 300
ip address 192.168.2.20 24
mpls
mpls te
mpls rsvp-te
quit
ospf 1
opaque-capability enable
area 200
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
4 Configuration Example of the Private Line Service
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
413

Table of Contents

Other manuals for Huawei SmartAX MA5608T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei SmartAX MA5608T and is the answer not in the manual?

Huawei SmartAX MA5608T Specifications

General IconGeneral
Dual Power SupplyYes
Humidity5% to 95% (non-condensing)
Uplink Slots2
Maximum GPON Ports16
Input Voltage Range-38.4 V DC to -72 V DC
Device TypeOLT
Power Supply-48 V DC
Operating Temperature-25°C to +55°C
Storage Temperature-40°C to 70°C
Switching Capacity128 Gbps
PortsGPON, XG-PON, 10GE

Related product manuals