Huawei SmartAX MA5608T User Manual

Table 11-15 Vectoring configuration items
Item Function Description Commands
Global band plan In the vectoring
algorithm, the
system requires
that the upstream
band and
downstream band
are separate from
each other.
Therefore, the
band plan must be
globally
configured.
l The band plan can
be globally
configured only
when vectoring is
globally enabled.
l After vectoring is
globally enabled,
if the band plan
configured for the
line profile is
incompatible with
the band plan
globally
configured for
vectoring and the
upstream band
plan and
downstream band
plan are not
separate from each
other, the port
cannot be
activated.
xdsl vectoring
bandplan-type
Global vectoring
configurations
Vectoring
configurations
take effect only
when vectoring is
globally enabled.
l Vectoring can be
globally enabled
only when devices
are configured
with VP boards.
l Before enabling
vectoring, globally
configure the band
plan.
NOTE
Services in a
vectoring group
port are interrupted
when the vectoring
function is enabled
or disabled.
xdsl vectoring
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 11 FTTB and FTTC Solution Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
902

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE