IAI PCON-CB series User Manual

2. Specications
2.2 Operation Modes and Functions
2-10 ME0342-4B
[2] List of Applicable Field Networks
Applicable for the field network shown in the list below.
Except for RS485 (Modbus), it is the option which can be selected when purchasing. It cannot
be changed after the product is delivered.
Also, for the field network other than RS485, PIO cannot be equipped. And Pulse Train Mode
cannot be operated.
PCON-CB/CFB Type
Field Network Name Description Details
CC-Link
Control of the actuator is available
with I/O communication using the
control signals same as those for PIO
or the numerical data communication.
Refer to the other ME0254
(Note1)
CC-Link IE Field Refer to the other ME0389
(Note1)
CompoNet Refer to the other ME0220
(Note1)
DeviceNet Refer to the other ME0256
(Note1)
EtherCAT Refer to the other ME0273
(Note1)
EtherNet/IP Refer to the other ME0278
(Note1)
MECHATROLINK-I/II Refer to the other ME0221
(Note1)
PROFIBUS-DP Refer to the other ME0258
(Note1)
PROFINET IO Refer to the other ME0333
(Note1)
MECHATROLINK-III
Synchronized control of several
actuators in highly constant periodicity
is available.
Refer to the other ME0317
(Note1)
RS485
Actuator is controlled with using a
general protocol “Modbus”
communication.
Refer to the other ME0162
(Note1)
Caution
(Note 1) PCON-CB/CFB/CBP are the slave units (slave stations). Refer to the instruction
manual of the master unit of each supplier and PLC to be mounted for the details
of each network.
For the instruction of the field network for PCON-CB/CFB, the instruction manual
is provided separately. Use the manual together with this manual.

IAI PCON-CB series Specifications

General

Brand	IAI
Model	PCON-CB series
Category	Controller
Language	English