Hardware Installations and Upgrades
Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide (Preliminary) 151
Figure 138. Hard Disk Order Screen
Boot Options
Hard Disk Order
Hard Disk #1 <Available Hard Disk devices>
Hard Disk #2 <Available Hard Disk devices>
Screen Field Descriptions
:
1. Hard Disk #1
2. Hard Disk #2
Option Values: <Available Hard Disk devices>
Help Text:
Set the system boot order.
Comments: Choose the order of booting among Hard Disk devices by choosing
which available Hard Disk device should be in each position in the order.
Back to [Hard Disk Order Screen] — [Boot Options Screen]
Floppy Order
The Floppy Order screen allows the user to control the order in which BIOS attempts to boot from the
Floppy Disk drives installed in the system. This screen is only available when there is at least one Floppy
Disk (diskette) device available in the system configuration. Note that a USB attached diskette drive or a
USB Key device formatted as a diskette drive will appear in this section.
To access this screen from the Main screen, select Boot Options > Floppy Order. To move to another
screen, press the <Esc> key to return to the Boot Options screen, then select the desired screen.
To Next Page
Loading...
Need help?
General
