Intel S2600CP - Installing and Removing a PCI Add-In Card; Installing a PCI Add-In Card; Figure 43. Installing Hard Disk Drive - Inserting 2.5 HDD Assembly; Figure 44. Remove PCI Slot Shield

Hardware Installations and Upgrades
Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide (Preliminary) 31
Figure 43. Installing Hard Disk Drive – Inserting 2.5” HDD assembly
Installing and Removing a PCI Add-in Card
Installing a PCI Add-in Card
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Remove the airduct by gentlely lifting the airduct out of chassis.
5. Remove the PCI slot shield from the chassis rear end. See letter A.
Figure 44. Remove PCI slot shield
6. Open the PCI card retainer. See letter B.