Intel S2600CP User Manual

Hardware Installations and Upgrades
Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide (Preliminary) 39
4. Connect the cable to the server board connector (see letter “E”).
Figure 61. Installing the Intel
®
RMM4 NIC
Removing the Intel
®
RMM4 Lite
Pull up the RMM4 Lite module to remove it from the mother board.
Removing the Intel
®
RMM4 NIC
1. Unplug the cable from module and server board.
2. Remove the screws and remove the module from the server chassis.
Installing and Removing the Intel
®
RAID Smart Battery
Installing the Intel
®
RAID Smart Battery
1. Connect the cable between the BBU and the RAID card. For details, see Intel
®
RAID Smart
Battery User’s Guide.
2. Locate the mounting holes inside the chassis.
3. Align the tabs on the plastic battery holder with the mounting holes in the chassis and slide the
plastic battery holder until the tabs engage with the mounting holes.

Intel S2600CP Specifications

General

Processor Support	Intel Xeon processor E5-2600 product family
Chipset	Intel C602
Memory Slots	24 DIMM slots
Form Factor	SSI EEB (12" x 13")
Storage	Up to 8 SATA/SAS drives
Network	Dual Gigabit Ethernet
CPU Socket Type	LGA 2011
SATA	SATA II and SATA III
RAID Support	RAID 0, 1, 5, 10
Network Controller	Intel 82574L
Power Supply	Redundant power supply support
Management	IPMI 2.0