Hardware Installations and Upgrades
Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide (Preliminary) 51
Installing the Fixed Fan
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Remove the air duct if the air duct is installed. For instructions, see “Removing the
Airduct”.
5. Insert the fan cable in the fan bracket as the figure15 show (see letter “A”). Pay attention
to the fan cable connector color. The fan with blue fan cable connector should be installed
in fan2 bracket; the fan with white fan connector should be installed in fan 1 bracket.
Figure 83. Inserting the fan cable in the corresponding fan bracket
6. Install the fixed fan in the corresponding fan bracket (see letter “B”).
Figure 84. Installing the Fixed Fan
7. Connect fan power cable to the server/workstation board. See the Quick Start User’s Guide
or Service Guide provided with your Intel server/workstation board for appropriate
connection location.
To Next Page
Loading...
Need help?
General
